1 / 4
Metric 25x9mm Hand tapping Die holder Guide w/ Fastening Plug and 3-10mm Plain Bearing Set — zdjęcie 1
1 / 4

Metric 25x9mm Hand tapping Die holder Guide w/ Fastening Plug and 3-10mm Plain Bearing Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Guide for use with a standardized Metric 25x9mm die holder. Includes Plain bearings for guiding 3-10 mm Rods.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
77
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A Guide for a Hand powered metric external thread tapping with a metric standard tap holder. Works well on soft metal rods such as aluminium, copper and brass. Tougher metals will produce swarf that will quickly wear out the bearings even with ample lubrication. 

Instructions: A plain bearing piece fitting your rod is inserted into the Guide. The Guide is then fitted around the body of the die holder and pressed into place by screwing in a retaining plug. 

Tagi