Wall Mounting Clips For Surge Protector YLPT-43
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips for securely mounting model YLPT-43 surge protector.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
These are two clips I designed to hold a surge protector from Home Depot securely on the wall. It is a dramatic improvement over the 3 slots they give you on the back of the plastic molding to wall mount these. The clips are specifically designed to be used with the extension cord seen at this link as of February 2026: https://www.homedepot.com/p/Commercial-Electric-8-ft-6-Outlet-Surge-Protector-White-YLPT-43/304521503. I am sure the brand labeling will change in the future but it appears the model name "YLPT-43" is consistent.
These were designed to be used with #6 screws and wall anchors.
My example picture is printed with ASA at 30% infill and 4 walls but I'm sure any engineering filament would be fine.