CNC 1610 TLO switch holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One of the side-effects of adding bed risers to my CNC is that I can pass the front edge of the bed slightly, which…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
One of the side-effects of adding bed risers to my CNC is that I can pass the front edge of the bed slightly, which makes it a convenient place to mount a microswitch to use as a tool length offset probe. This mounts to the front, slightly high to allow for a printed sacrificial bed and PCB bracket, with some wiring channels off either side. It's wired in parallel with the Z probe (A5 on a typical GRBL board).
For tool changes in software this works perfectly for milling PCB's with a combination of pcb2gcode and bCNC; YMMV with other stuff.
Category: Parts