DPS5005 Power Supply Case for Benchtop or SKADIS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A compact benchtop case for the DPS5005 DC power supply with the ability to mount to SKADIS pegboard.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a compact benchtop power supply case for the popular DPS5005 and other DC/DC controllers in that family. It also provides the ability to mount it to IKEA SKADIS above your bench to free up space. I am powering this DPS from a 19V 90W AC/DC power supply with a 5.5mm x 2.5mm DC Power connector.
Printing and assembly of the case is straight forward. The examples are printed in PETG with only organic supports "from the print bed" to help with the shape of the holes for the power jack and the switch, and "support blockers" are used on the tops of the cooling slots. Assembly of the case body itself doesn't require any additional hardware, and the faceplate just snaps into the body with slots/tabs on either end. The case body can easily be "mirrored" to move the switch and power supply connections to the left side if you prefer.
The holes for the binding posts are positioned on standard 3/4-inch (19.05mm) centers, and the diameter of the holes is 9.5mm with a 1mm flat. The hole for the ON/OFF switch is 19mm x 12mm and the hole for the power jack is 11mm. Here are the components used for reference when designing the case.
Amazon.com: BOCEUC Gold-Plated 4mm Banana Plug Speaker Connector, Binding Post Terminal for Home Theater, Amplifier, AV Receiver, Wall Plate : Electronics
Amazon.com: DaierTek Mini ON and Off Rocker Switch 12V 20A T85 2 Pin SPST Small ON Off 120V 10A Rocker Toggle KCD1 Switch Pre-Wired Black for Automotive, Car -10Pack : Sports & Outdoors
Amazon.com: E-outstanding 5-Pack DC-099 5.5 mm x 2.5mm 30V 10A DC Power Jack Socket,Threaded Female Panel Mount Connector Adapter : Electronics
If you wish to use the DPS with IKEA SKADIS you will also need to print the hooks developed by DsK_Printing which are not included with this model. The required "skadis_hook" can be downloaded from here: https://www.printables.com/model/485020-modular-storage-system-for-ikea-skadis The holes for the hooks are purposely a little tight to keep the hooks secure and may need a quick touch up with a round file.