1610 CNC ziptied X/Y endstop mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tried some other endstop mounts, but they were more complicated than I thought was necessary and tended to stick out…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Tried some other endstop mounts, but they were more complicated than I thought was necessary and tended to stick out too much.
These are about as minimalist as you can get without just gluing the endstop directly to the rail bracket.
Clip the endstop to the mount, slip the end in next to the bracket bolt (you might need to loosen it a hair), andtightly zip tie in place.
For the Y axis, there's a couple of trigger blocks that mount underneath. Just loosen the mounting bolt, slip the appropriate trigger assembly over, and tighten down.
July 30, 2019: added "tall" versions to work against the bed riser blocks, which work without the Y trigger blocks.
Category: Machine Tools