MakerFarm i3V ATX PSU mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There's a few ATX mounts for the i3v out there, but they were either far more complicated than necessary, covered the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
There's a few ATX mounts for the i3v out there, but they were either far more complicated than necessary, covered the side fan on the PSU, or mounted on the too-crowded RAMPS side. I wanted to mount it in the area intended for the PSU and clean up my long neglected wiring.
Note that if you want to play with the OpenSCAD, you'll need the source for thing 1257152.
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm i3v 8
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Notes:
Printed in natural PETG.
Post-Printing
Insert a couple of M5 nuts and attach with M5 bolts (12mm should do it). It might be necessary to enlarge the PSU mounting holes (both in the frame and mount).
Category: 3D Printer Parts