Customizable Swivel Buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been looking for a easy-to-print, low-volume, low-profile snap buckle that would work scaled up to 4"... spope's…
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 346
- Wydruki
- 3
- Wyświetlenia
- 1002
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've been looking for a easy-to-print, low-volume, low-profile snap buckle that would work scaled up to 4"... spope's swivel buckles don't scale, but the basic design kick-started my brain enough that I threw together this simplified parametric design whichshould do the trick (update: yup).
Update Dec 8/15: adjusted the post geometry for easier/stronger printing (tapers work better if they start a few layer off the build platform), tweaked the tooth design.
Update Dec 11/15: made customizable, minor tuning, cleaned up magic numbers
Print Settings
Printer Brand:
RepRap
Printer:
Makerfarm i3v 8
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Notes:
Tested okay with PLA and PETG. PETG could maybe be tighter.
Category: Replacement Parts