Ball Chucker (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your dogs all like tennis balls, get a Chuck-it. If your dogs like other kinds of balls and you want to exercise…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 2
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
If your dogs all like tennis balls, get a Chuck-it.
If your dogs like other kinds of balls and you want to exercise them, a parametric ball chucker tuned for their favorite kind of ball will save your arm.
This one attaches to a standard broom handle (or squeegee handle, in my case) using http://www.thingiverse.com/thing:8478
Note that the STL's are tuned to work with very specific types of balls (i.e. the 80mm is for a fairly squishy Hartz Dura Play, the 100mm is for a large Sprong! hex ball) and may not work well with any random round thing you try. It's worth taking the time to tune and test with your own toys.
Print Settings
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
25%
Notes:
Printed in PLA and PETG.
It likes a raft and/or brim to print successfully on its side as the tips have a tendency to curl. I've managed without, but it's not as easy.
Category: Sport & Outdoors