Phrozen Arco Filament stand on top
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracked for the Arco Penta Shield. To put the Filament spool holder to the top side of the printer.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
While waiting for the Colour Chrome, would it be nice to have the filament on the top og the Arco printer when the Penta Shield is mounted.
This design is a backed for the included spool holder. it shall replaced the top lid window and include a filament feeding hole for the filament making it more easy to feed new filament from the top instead from the rear side of the printer.
There is included two designs. one for M4 heat-inserts and one for M4 nuts.
I have made mine with Sunlu highspeed PLA in orange (07250219E) which is almost in identical colour.
Print Instructions:
Material: PLA, ABS, ASA, PETG etc.
Layer height: 0.2mm
Infill: 25%
Support: None
Extra materials:
2 PC. M4 nus or: 2 PC M4 Heat-inserts.