10-inch Rack Mount Lacing Bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable manage your 10-inch rack with this printable lacing bar
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v3.0
Use this 10-inch lacing bar to cable manage your 10-inch rack in order to achieve a different sort of cable management look or if you are trying to make rack mount devices with screens visible behind all the cables.
Printing: Print with the model at a 33 degree angle to fit on the build plate of most common Prusa printers such as the MK3/MK4/Core One. Prints best on it's side. I printed it with Prusament PETG.
Print settings: 0.15 Structural, 25% infill, Supports everywhere.
Installation: Unscrew either the top two or bottom two screws from the device you wish the lacing bar to sit on top of, place the lacing bar over those holes, and then screw the rack screws back into place.
Usage: Works best using thin style CAT-6 ethernet cables and secured with a thin 1cm wide velcro style cable tie. I personally also installed a vertical rack cable management system to the right side rail of my 10 inch rack. These were bought on amazon as they are designed to work with any size of rack. See the pictures for usage ideas.
Compatible with all popular 10-inch rack systems