SpeedDrive Remix Dragchain - HeroMe5 Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dragchain mount/HM5 remix for the popular SpeedDrive design by Sashalex007
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 631
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Another remix of the popular speeddrive compatible with the HM5 and BMG with a pancake stepper. I added a mount for a dragchain and made a part for the X motor plate to recieve the other end (Ender 3 Pro, probably Ender 3 and v2 aswell).
These files are meant for the HeroMe5 and will not work with the Bullseye as the original SpeedDrive was meant for.
See the pics for reference.
I also added a reinforced version as I saw there was still room for it. Nothing major, 0.6mm under where the BMG mounts and 0.4mm of thickness on the wheels mount.
This is the cable chain I used: https://www.thingiverse.com/thing:3715002 (thanks Diogosantos88)