"Osprey" Airsoft Suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suppressor based on the Osprey 45k
- Ocena
- 5 / 5
- Polubienia
- 343
- Pobrania
- 1805
- Wydruki
- 3
- Wyświetlenia
- 13 883
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This silencer is based on the Osprey 45k and was designed to be used on my 1911 R32 and holstered on my Swiss Arms Adapt-X, so the dimensions are definetly not accurate in relation to the RS one.
Dimensions: 23 x 35.5 x 150mm
The baffle is optional, on a GBB it doesn't suppress the sound and I doubt any suppressor does since most noise comes out the silde, altough it might on a NBB.
Hardware used:
2 x headless M3x3
2 x M3 nuts
1 x small wood screw
(optional) 1 x 1.5mm allen key, cut to size
I field-tested a PLA version and it held on very well. Due to the temperature my replica was losing some gas after some shots so I could see the gas escaping the end of the silencer, which was cool looking.
I might upgrade the cover + key part in order to remove the need for the small screw in the future.
_____________________________________________________________________________________
Changelog:
26-11-2019
- Re-uploaded the threaded STLs for compatibility with Slic3r.