1 / 4
Hand Spinning Toy - 2-Part Easy Print - No Supports Required — zdjęcie 1
1 / 4

Hand Spinning Toy - 2-Part Easy Print - No Supports Required

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hand-operated spinning top created specifically for easy printing

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Wanted to create a spintop that you can operate with your hand but without having to use supports for printing it. That's why this model is split into two interlocking parts that require absolutely no support material.

Support-Free Design: Each part prints flat on the build plate, eliminating waste, saving filament, and ensuring clean, ready-to-use surfaces.

Print Order: For the best layer adhesion and strength, it is recommended to print the parts in sequential order. But it's not needed.

Simple Assembly: The two parts press together securely in seconds—no glue or tools needed.

Tagi