Fat Pikachu front panel for BeamCase SW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pikachu-themed front panel designed to fit on a BeamCase SW.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a custom fat Pikachu front panel for my BeamCase SW print
There are three options in the file:
- Pikachu with no power button hole
- Pikachu with power button hole in the lower part. This will fit the original frame as well, alternatively if you want to modify the original frame yourself.
- Pikachu with power button hole matching the power button hole on the compatible with the original BeamCase SW frame.
I printed mine on a P1S at 0.2mm layer height with 4 colors. The eyes are part of the file, but if you like me are restricted to 4 colours I would leave out the eyes. I did so and filled the eye void with white paint afterwards.
I suggest printing with the Pikachu face down, and make sure that the black layer goes down first to ensure crisp contours.
Front panel will fit on a BeamCase SW only in the most narrow configuration!