1515 extrusion replacement for BeamCase SW (205mm long + step file for custom length)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1515 aluminium extrusion replacement for BeamCase SW
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified my BeamCase SW to use an HDPlex GaN 250W unit embedded in the front panel of the case, and I made this 3D-printed makerbeam replacement to get the case length down to 225mm total length (reduction of 95mm) by using 205mm long beams. I'm sharing this file in case someone wants to do the same.
I have also included two step files:
- One for the unbroken 205mm beam
- One consisting of two bodies to allow for easy extension to any length you want.
Uses m3 threaded inserts where screws are required. The beam does have a case front end and a case back end, but holes are equal on all sides so that rotation doesn't matter.