1 / 2
Parts organizer box shelves for 50cm Lundia — zdjęcie 1
1 / 2

Parts organizer box shelves for 50cm Lundia

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For Lundia 50cm wide 40cm deep shelf and Stanley 25 locker 1-92-748 organizer.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
73
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

Shelve brackets for briefcase type Stanley parts organizer. Brackets are compatible with old and new type of Lundia ladders. Easy to modify for 30cm depth shelves. Uses regular Lundia shelf holder pins, no screws.

Each module holds 3 boxes. For that you will need:

  • 4pcs of brackets

  • 12pcs of rails

Assemble the rails in-place. Note that you may need to clean up the friction fastening end of the print as the tolerance is quite tight. I do not recommend using a brim, should print easily without.

I used 15% infill with PLA, but structurally even less should be fine, unless your boxes are extra heavy. 

Tagi