Desktop organizer/storage box (Iris mechanism)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box that can be opened using an iris mechanism. Small items can be stored in the box in six different compartments.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 191
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the parts as many times as listed below:
6x Iris box_pocket
1x Iris box_bottom
1x Iris box_top
1x Iris box_screw wheel
You will also need one plastic screw (W1413) (7mm long; 2mm wide) or print the screwless version.
Important printing information:
It could happen, caused by printing, that the holes for the screw in parts "Iris box_top" and "Iris box_screw wheel" not have a diameter of 2mm. If that has happened, you'll need to enlarge the hole with a drill, so that the hole has a diameter of 2mm.
You can print all parts without support-structure.
Building instruction:
1. Place the pocket-parts ("Iris box_pocket") onto the shafts of the top ("Iris box_top")/("Iris box_top (no screw)") of the iris box. The pocket of the part "Iris box_pocket" should be facing towards the base plate of the part "Iris box_top".
2. Next place the part "Iris box_bottom" on top of the top of the iris box with the pockets, so that the part "Iris box_bottom" fits onto the middle shaft of the part "Iris box_top". The small shafts of the part "Iris box_bottom" should fit into the guiding grooves on the bottom of the pocket-parts.
3. Place the part "Iris box_screw wheel" into the lowering of the part "Iris box_bottom". Screw down tight the screw wheel with the plastic screw.
For the screwless version: Press the part "Iris box_locking shaft (no screw)" into the lowering of the part "Iris box_top (no screw)". The new version isn't stable as the screw-version (If the parts aren't tight enough you may have to use some glue).
