Collar for 2 in. (50mm) Barbell
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of MacialT's "Simple Barbell Collar v2". It contains counter-sunk holes, hex nuts, and tpu pads.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I really liked MacialT's barbell collar, but I wanted tpu pads, counter-sunk holes, and hex nuts for added strength and durability. I also wanted a better latch grip for locking/unlocking the collars. I am very happy with this design, and it works really well.
You will need:
M4 SHCS 40mm x8
M4 SHCS 22mm x1
M4 nuts x9
M3 SHCS 30mm x1
M3 nut x1
Print Settings:
I believe you can use the same material and print settings of MacialT's original model. I used 5 walls, 5 top/bottom layers, and solid infill for extra strength. I also printed in ASA, but I'm certain ABS and PETG will work just fine. I do not recommend PLA since it will warp if left in a hot car. I also recommend using loctite on the screws/nuts, but be very careful as it will dissolve ASA and ABS.