HDPlex GaN 250W Front Panel for BeamCase SW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
HDPlex GaN 250W case front panel for BeamCase SW
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement case front panel for use with BeamCase SW that allows you to use to mount a HDPlex GaN 250W PSU in the front. If you use this together with my 205mm 3D-printed makerbeam replacements you will be able to get your BeamCase SW size down to 5.1 litres.
If you have aluminium extrusions already, you can use 200mm 1515 extrusions, but it will be very tight with the cables coming off the PSU.
Two version have been uploaded:
- 10mm thick version
- 9mm thick version (same thickness as original)
M3 threaded inserts to be used in the mounting holes for the GaN 250W PSU mounting plate.
PSU to be mounted with the connectors at the top, and the PSU on the motherboard side of the case.
READ BEFORE PRINTING:
1. Requires you to purchase the BeamCase SW files v3.0 to be able to build a complete case
2. Only fits the most narrow configuration of BeamCase SW (40mm GPU+50mm CPU)!
3. The file is not a remix/edit of the BeamCase SW file due to licensing, and has been modelled entirely from scratch
4. Requires the back plate to be mounted on the HDPlex GaN 250W.
Follow print advise for the original BeamCase SW files