1 / 7
Titan Aero + MGN12 with Stock CR10 or Tevo Tornado
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Remix allows you to use the Creality CR-10 Titan Aero Mount on a MGN12 rail. Changes to the original Removed the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This Remix allows you to use the Creality CR-10 Titan Aero Mount on a MGN12 rail.
Changes to the original
- Removed the smaller holes that would have been used to mount to the Tornado metal plate
- Added two holes to mount to the MGN12 adaptor
- centered the holes to minimize loss of Z travel
When using this mount on the Rail the standard X motor mount and pully does not work you will need to make the following modifications
- Remove the stock x end stop plate holder, and replace the top right hand screw with a free floating idler for the belt to rest on
- print and attach the Tarantula X-Axis Motor and Idler mounts to raise the belt over the rail
For more pictures of a different but similar mount please see: https://www.thingiverse.com/thing:3154738
Category: 3D Printer Parts