Wall Mounts for Dyson Vacuum V7-V12

Wall Mounts for Dyson Vacuums V7-V12 with dovetailed bracket that hides the screw. Modelled for M5 screw with <= 10 mm head.

🖨 Share your makes! 🖨

I'd love to see how this model turns out for you.

Options

• You can mount them individually or stack two in opposite direction. For individual ones, there and option of open or closed/rounded top.

• Several tolerances: 0 / 0.05 / 0.1 / 0.15 / 0.2 mm

• Two distances from the wall:

  • 10mm for most attachments

  • 30mm for bulkier attachments

How to print

Prints without support and infill! It is still very sturdy. A drywall gave up before the bracket did when I tried to force the dovetail in. I haven't tested a 0.4mm nozzle but I see no reason why it should not work.

Tolerance will differ for different material and vendors. With Alzament PET-G, 0 tolerance can be hammered in but not disassembled. 0.1 can be disassembled. Check tolerance for your material on a small tolerance test before you print. Other tolerance values can be generated from OnShape if needed.

Layers and perimeters

• Nozzle: 0.6 mm (0.4 mm)

• Layer height: 0.32 (0.2)

• Perimeters: 2 (3)

• Solid layers - Top: 4, Bottom: 2

• Extra perimeter if needed

• Detect bridging perimeters

• Single perimeter on top surfaces: All top surfaces

• Only one perimeter on first layers

Infill

• Fill density: 0%

• Top/bottom fill pattern: Monotonic lines

Skirt and brim

No brim

Support material

No supports

Speed

Make Bridges and Gap fill very slow. I set mine to 30/20.

Editing

Remixes are welcome. The original model can be copied from OnShape.

Changelog

2026-02-09 - 1.0.0

Initial release