KCD2 Zimburg Reliquary Case Philips One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Philips x KCD2 submission: box for Philips One
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a submission for the KCD2 competition. It is the Zimburg Reliquary which I wanted to model from scratch from the wiki image below
It features an angel on the top, praying, some red and white stepped boruder around the top of the box and then some hard to decipher decoration on the main body of the box which I interpreted in my rendation as two monks next to the lock and some further decorative elements.
The inside should fit the Philips one and leave some room for extras.
Print instructions. Print box and body the best way you see fit. Hinges should be printed upright and can be glued in the recessed parts of bottom and top, fixed with a tiny bit of wire. The angel on the top is actually a lithopane so you should print it on the thin side with .1 mm layer height.