Sink Drain Strainer Debris/Jewelry Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strainer for 85mm kitchen sink drains, works best with garburators (Food Waste Disposers) such as Insinkerator®
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I reimagined sink drains strainer after my necklace almost fell into the food waste disposer and had to dig through slimy food waste with gloves on to fish it out.
A simple & convenient sink drain strainer that fits any 85-90mm kitchen sink drain. It prevents cutlery, utensils and large objects (such as jewelry) from falling into the drain or food waste disposer. After inspecting the debris and making sure it's all safe, you can simply lift it with the lift bar and rinse the sink with water to let the food debris drain. You can also directly dispose of any food waste through the top opening.
Compared to traditional sink strainers, this one is:
Easy to dispose of waste
Lift without touching gross food waste with your hands! (ewwwwww)
Does not get clogged and is SUPER easy to clean
If printed with heat-resistant filament, it can be dishwasher-safe.
It is recommended to use PETG or other water-resistant filament, not recommending PLA. However, PLA ones will still work and last a long time, especially when treated with stain-resistant spray (such as RE'SIST)
For best print quality, it is recommended to print with arch overhang(if available) or tree support.