Plywood Hanging bracket for Wire Rack Shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A backing plate with 6mm spacer and nut holder to attach plywood to a typical wire rack with the wave shelf edges.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Public Domain
A simple mounting bracket and spacer to fill the gap between the proud spots on the shelf mount tubes and the back of the shelf side. I wanted my plywood to mount snugly so it didn't rattle but not be warped. These brackets fit inside the shelf and have a spot to hold the nut for easy attachment. Manufacturing tolerances on these shelves is.... sufficient for a wire shelf? so there is some slop in the design to accommodate variances.
I think what I uploaded is parametric step file so you can adjust things to fit you particular situation. This is my first posting so let me know if this in wonky in some way that makes it unusable.