Modular flat pack tower system - DnD/TTRPG
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A set of modular towers for DnD and other TTRPGs.
They are made to use as little space as possible for storage, while still functioning well. Sizing is for a 25 mm/1 inch grid.
The sizes of the bridges correspond with the size when it's in use. They are a bit longer to accomodate the overlapping parts.
There are multiple types of pieces for almost everyting. However if you just use one type op wall, top, middle and bottom pieces you already have everything to build a tower. The top pieces can function as middle piece aswell. That way you can connect ladders and bridges etc at different heights.
All pieces are oriented to be printed without supports. However I do recommend printing the walls with a brim for better bed adhesion.
They are FDM friendly. I printed them with an Ender-3 V3 KE.