Work Table Vice Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have this table - Supercraft - and found it very useful. However the handles for tightening/loosening the table/vice…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 342
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Have this table - Supercraft - and found it very useful. However the handles for tightening/loosening the table/vice broke off some time ago and made using it a drag.
All that was left was the piece found in image 2 above - small black broken pieces of plastic.
So measured and designed better handles that clip on, are much stronger and also added a "sleeve" to aid use.
Objects were designed in Sketchup and Sketchup files included for modifications if needed.
Print Settings
Printer:
Geeetech Full Metal Aluminum
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
35%
Notes:
Objects must be printed with support. Only the main handle needs support. The handle must be printed as shown in the build palte with supports to ensure strength and with an infill of >30%. I used 35% and it is pretty strong.
After printing, clean up model, rub some candle wax on the end part, slip the Outside handle part - the cylinder - over the handle and press fit.
Category: Hand Tools