Electric knife foam cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds electric kitchen knife for cutting upholstery foam squarely and easily.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is designed to hold an electric kitchen knife to the bottom side of a flat surface to cut upholstery foam. It was designed to fit a Black and Decker Slice Right Electric Knife. It makes it easier to get square straight cuts.
I do not know if it fits other models. This is an older knife. The current model is similar, however, I do not know if it fits. Amazon has a model that looks more like it.
A bolt was installed inside the block to hold the trigger on when in the mount. Notches were provide in the side to access the blade release without removing the knife from the holder. The knife fits snug in the mount. A couple bolts and wing nuts were used to secure it in place. The knife can be easily mounted and removed.
Mount the block to any flat surface. I used a sheet of hard plastic. Transfer the mounting holes and cut a clearance hole for the blade.
BECAUSE THE KNIFE TRIGGGER IS HELD ON, ALWAYS REMOVE THE BLADE UNPLUG BEFORE MOUNTING UNIT. USE OF A SWITCHED PLUG STRIP IS ENCOURAGED.