Dodgy Arcade2TV-XR Shelf Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here are some shelf brackets for the X-Arcade Arcade2TV-XR pedestal. One set for the top, others for lower.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 55
- Wydruki
- 2
- Wyświetlenia
- 220
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Here are some shelf brackets for the X-Arcade Arcade2TV-XR pedestal. The brackets for the top shelf replace the rubber covers and are specifically for anyone who upgraded to the Haptics kit and has an extra top from that.
The side brackets clip into the holes in the rails. They were designed with that same top in mind, but they would work as well with a piece of wood cut to the right width. If you keep the Arcade2TV-XR up high, you could also put the shelf under the joysticks. The holes are in case you prefer to bolt the shelf to the existing L bracket.
If you are reusing the old top, check out my Dodgy Arcade2TV-XR Quest Controller Blanks for a cleaner surface.
Note that a shelf over the unit can interfere with the location syncing with the Quest. A lower shelf still works, but you'll need to sit or stoop while syncing the location so the controllers are fully visible. If you put the shelf higher, it's less of a problem, but in either case the shelf will show up in XR. You'll need to take the shelf off for mixed reality with the Arcade2TV-XR.