Lyman Brass Smith Powder Drop Hornady Case activated adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linkage & powder through ram to adapt Hornady LNL case activated adapter to the Lyman brass smith powder drop
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I bought the Hornady case activated powder drop attachment (https://www.hornady.com/reloading/presses/lock-n-load-accessories/case-activated-powder-drop-powder-accessories#!/ ) hoping it would work with the Brass Smith dropper, it did not. So I created the pieces needed to convert it. Just put it together so haven't had a chance to put some hours of use on it to see how it holds up, but functions properly as of now. I would not recommend using the expanders with this setup unless printed in stronger material. Have only tested with the small caliper rifle drop installed.
Update: PETG did not hold up on my first test for the ram, although I had printed it standing up so it broke along the layer lines at the threads. Reprinted with nylon and horizontal, will see if that lasts.