Worker thread to 16mm OD nerf barrel adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter I made for worker barrels to fit into breeches made for 16mm OD aluminium barrels
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 130
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
A worker barrel thread designed to fit into 16mm barrel chambers. the ID of the chamber is around 13.5 to be printed between 13.2 and 13.3 mm Id to accomodate Oring sizes and reduce friction/wear from layer lines.
This is a printed chamber so I suggest really thin layers... ideally 0.16mm layer height but smaller is better to reduce wear on your orings and get a better seal.
originally designed for the twist fury pusher breech kit by Doublestriker, if it's too long then it can be easily shortened