Shortened version of V4 suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shortened to a 4 baffle stack, and fluting and embossing removed to improve outer shell strength
- Ocena
- 4,667 / 5
- Polubienia
- 99
- Pobrania
- 857
- Wydruki
- 2
- Wyświetlenia
- 2899
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed n.leinad great design to make it a bit more of a workhorse.
I enjoyed the original design, but from previous experience with suppressors with lots of baffles, adding more baffles after 4, the noise attenuation is unnoticable with subsonic .22lr ammo. Also the thread alignment becomes more critical the longer it is. Baffle strikes become a real issue.
This got printed using PETG with 100% infill, with adaptive layers turned on, so the threads were actually usable without requiring a tap to chase the threads and clean them up.
Threaded in 1/2 x 20, and barrel contour added for a Tikka T1x barrel. Added a 1/2x28 threaded version after a few people requested it. I have not printed this, and have no rifle with a 1/2x28 thread to test it on.