SwitchBot Lock Pro/Ultra - Securemme Key Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter like original, for use Securemme's security cylinder, with SwitchBot Pro and Ultra
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an adapter, identical to the originals, that allows you to adapt the Securemme key to the Pro and Ultra locks without having to file the key shell, ensuring an excellent fit.
This adapter is suitable for all Securemme K-series keys.
Print in ABS,PET-G or PLA (but with infill 75/100% and mode Rectilinear/Gyroid)
NOTE
It will be necessary to remove the key from the original plastic shell (simply remove the plastic stop with a pen) and file the bottom of the key with a flex file, as shown in the photo. I will upload a file with the exact dimensions.
This does not affect the ability to put the key back into the shell as if it were the original, without noticing any difference.
Unfortunately, the base of the key is wider than the housing in the SwitchBot, so this is a necessary measure.