Unicorne Travel Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case is designed to carry both halves of this split keyboard produced by Boardsource.xyz
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This case is designed to carry both halves of this split keyboard produced by Boardsource.xyz
I have three variations here. We have a simple low profile (Choc V2 switches) and a full sized MX cherry variation, the only difference is the spacing between the two halves. The design uses some key to key interference to limit rattle. The used keycaps will have an impact here. I've tested with smolo caps and choc V2 switches. you may have to adjust the design if your keycaps differ significantly.
The third version here includes capture features for a small USB-C to USB-C cable that would join the split keyboards. The detail is designed around a 12in anker cable available on amazon.
I've included 4 locations for the tenting feet to be stored, but the holes will need to be drilled/tapped.
Final material is flexible, but support is needed.