Tapo Camera mount for Print Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for a Tapo camera in an Elegoo print enclosure
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Open Community License v1
This model was made to mount a Tapo camera inside my elegoo print enclosure. The model was designed so it clips onto the vertical poles of the enclosure structure. the mount will work either as shown in the pictures or upside down.
The mount features two holes for bolts to go through to firmly secure the camera, but double sided tape would also be more than sufficient.
The mount clips are somewhat fragile. they will hold on well, but if you bump the mount when removing a model from the printer, they can break. V2 will strengthen these if I get to it.
This was printed on my elegoo neptune 4max in PLA.