M8 and M10 Tripod quick detatch mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to attach items with an M8 or M10 mounting hole to common tripods with a square quick detach mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This part allows for mounting lights or other items with M10 and M8 holes to tripods with the square quick detach mechanism (~35mm at the top and ~43 at the bottom). I use this to attach LED parcans or similar lights to my camera tripod when i want to set them up somewhere.
Printing notes
The parts are best printed with the top side down and wont require any support in this orientation (STLs are allready oriented correctly).
Required hardware
I used the following parts for the setup in the photos which should work for most lights with be but other combiinations of bolts and nuts should also work with the adapter if needed
M8/M10x20 hex head bolt
M8/M10x20 washer
M8/M10 wing nut