Skoda Enyaq waste bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a waste bin that fits inside the cupholders of a Skoda Enyaq
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 892
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I reused a model of a cupholder insert that i found on makerworld (https://makerworld.com/de/models/1907363-enyaq-elroq-cupholders?from=search#profileId-2044930) and rebuilt it into a waste bin that fits inside the cupholders of a Skoda Enyaq. So thanks to the original creator of the insert although i only used it as a reference of the outside dimensions.
It fits quite nice and doesn't block the phone charger at all.
Just make sure you use some heat resistant filament depending on your local temperatures ;-) I used GreenTec Carbon which looks really nice because of the matt finish. The inlay is made of regular PLA though because GTC doesn't bond to PETG that great.
Print settings are standard ones. For the best result make sure the model of the base is tilted so the top is flat (like in the slicing screenshot.
Optional: dual color print. I printed on a Prusa XL 2T. If you want to print the letters seperately you may have so resize them a bit because of tolerances.
I also made some holes für little 3mm x 1mm round magnets that keep the lid shut. You have to insert stops in your print file to insert them because i don't like visible magnets ;).
Materials needed:
2x M3x >15mm screws
optional: 6x 3x1 mm round magnets.