Inland Coolant Pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table riser for use with Inland Coolant Pump for Kristall 2000S Glass Grinder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Table riser for use with Inland Coolant Pump for Kristall 2000S Glass Grinder.
I added a spiral internally and that has helped with consistency in getting the water started flowing up and out of the spout. Takes a bit to start sometimes (I believe due to surface tension), but has consistently gotten going on this version of the model.
Designed to work in tandem with table riser to maintain better control of glass,
After seeing how much a similar part bought from vendors cost I decided to try and model it.
Print Settings:
.2 Structural
Snug support buildplate only
If you have any questions or need anything adjusted let me know.