1 / 16
Danish Interior Door Router Jig Hinge / Indstikshængsel, Slutblik og Dør — zdjęcie 1
1 / 16

Danish Interior Door Router Jig Hinge / Indstikshængsel, Slutblik og Dør

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Router jigs to install a door in a wooden frame for parts you get in Denmark 65x40mm Indstikshængsel 100x30mm Slutblik

Ocena
0 / 5
Polubienia
2
Pobrania
17
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Background: We put a door into a frame that wasn't fitting for a door. So we needed to cut the slots for the hinges and the striking plate / slutblik into the frame. Additionally we had to cut the door, so the cuts for the hinge on the door also needed to be made.

I bought the hinges at J&F if you want to get the same. Not sure if other nordic countries use the same hinges.

  • Indstikshængsel hvid 2 stk., Varenr.: 9052919

  • Låsekasse ASSA 110 mm, Varenr.: 9052983

This is a set of 4 router jigs, for a 12mm router with a 17mm Kopiring. The jigs have a plateau for setting the correct router height. They also have a center marking for easy positioning. 

  1. Doorframe hinge jig

  2. Door hinge jig

  3. Slutblik outer flat area jig

  4. Slutblik inner deeper area jig (fits into hole after no.3 has been used)

Manual:

  • Mark the center position of the intended cut out

  • put the jig in position

  • is duct tape / painters tape to hold it in place

  • set router to desired depth on the jig's dedicated surface (surface highlighted red in the pictures)

  • start med at fræse

I'd recommend to try on a leftover piece of wood first and see if the hinges fit.

Tagi