USB DISC HOLDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB DISC HOLDER against search restrictions and for the use of free openings in the enclosure
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you are like me and often find yourself searching for your flash drive, then this holder will come in handy. And if you have leftover parts from assembling your Prusa enclosure, then all it will cost you is the filament. It can be attached from the outside or inside anywhere there are two holes next to each other. I used the space in the front next to the USB connector. I used plastic clips for mounting. I also added a file with mounting using nuts and screws. The model is designed for M3n nuts and M3x8 screws.
Printed with supports, leave the model in the loading position, made from Prusament PETG Orange