JRX2 mini to Turbo Hopper conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to use a Turbo Hopper body on a JRX2 mini.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I loved the Turbo Hopper and have several now. Many have bad electronics and if converted to hobby grade RC it is easy to break them.
Also, all the ~40 year old tires are bad in one way or another. They are either flat/cracked or hard as a rock.
I tried to figure out a way to use JRX2 mini tires on a Turbo Hopper without success. Decided to convert a JRX2 mini into a Turbo Hopper instead. Modern parts and good tires.
While a stock Turbo Hopper body will fit on this mod, the included body will NOT fit on a stock Turbo Hopper.
You will need a collection of 2mm and 3mm screws of different length. If you are going to use the bumper, you'll need longer screws like those in the front of the JRX2.
For the light pods and bumper guard, you can find Zedic's fantastic designs at the links below. Be sure to give him a like and follow.
https://www.printables.com/model/287696-light-pods-tyco-turbo-hopper-taiyo-jet-hopper/files
https://www.printables.com/model/287703-turbo-hopper-bumper-guard-taiyo-jet-hopper