1 / 9
No belt gearbox for 3dsets reaper and sakura — zdjęcie 1
1 / 9

No belt gearbox for 3dsets reaper and sakura

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No belt gearbox for 3dsets reaper and sakura

Ocena
0 / 5
Polubienia
11
Pobrania
61
Wydruki
0
Wyświetlenia
392
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

So i tired of rebuilding belt driven gearboxes and, at the end, decided to get rid of belts.

I use setup with 3536 brushless motor ezrun max10 esc and 4s lipo battary, and looks like my setup produces more power then any kind of belt driven gearbox can handle. I tried to use stronger materials and even metalic rollers and shafts, but in the end when rollers stopped to wipe out belts started ((.

https://rctimer.com/rctimer-a3536-1250kv-outrunner-brushless-motor-p0209.html

https://www.hobbywing.com/en/products/ezrun-max10-sct52

This project is geared box without belts. It designed to be close to original "belt driven" gearbox from it's size and ratio prospectives. For now i used it for sakura (model 17) and reaper (model18) 3dsets models and it already proven it way more resillient then belt driven gearbox.

I printed gears of bambulab ppa-cf (but actually even pcfr showed good results) and shell of pcfr (but in theory you can even print shell of pla).

All the gears have numbers on it reflecting which shaft it is starting from 1-which is motor (input) gear.

Output shaft is a little different from rdsets version so 3dsets cardan would not fit, but used original motor mount plate, so you can keep existing if you already printed it.

The gearbox ration is 4.79:1 which is slightly lower then original 5:1 (but i use more powerful 3536 motor).

I still in process of testing but till now both of my two test gearboxes works fine and already proved it way more resillient then belt driven. I believe it might handle event 3542 motor

Tagi