Ethernet Breakout Enclosures (PCB)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These little enclosures are for the PCB-style ethernet breakout boards that are design for pin-headers. When you need…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
These little enclosures are for the PCB-style ethernet breakout boards that are design for pin-headers. When you need a bunch of small wires I'm a big fan of ethernet cable as it's generally fairly durable, reasonable insulated, and very cheap and easy to get. I use these on my 3D printers and I would strongly encourage stranded ethernet cable for things that are moving a lot.
These are a bit of labor. You'll probably buy the PCBs (https://www.amazon.com/gp/product/B079L6C96M) and jacks (https://www.amazon.com/gp/product/B07CWJZSPC) separately. You'll need to solder them together as well as solder on pin headers or wires however I'm in for less then $1 a piece.
The case is design so you can plug ping in directly from the top as you would expect or loop them through the back of the case. This helps alleviate some of the pressure on the pins.
Category: Electronics