Dessicant Holder for Filament Rolls
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for indicating silica gel dessicant beads that fits in the center of a filament spool.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These two end caps are used with a 55mm section of 1 1/2" Schedule 40 PVC pipe to hold indicating Desiccant beads. This fits in the center of most filament spools for storage or use in an AMS.
These were printed on an Anycubic Kobra S1 using PLA and a 0.4mm nozzle, and the .3mf file for that is included. I also include a .stl file for use with other printers, but you must adjust the line width (.41 for me) in order for the caps to fit the pipe just tight enough.
The mesh bottom requires both top and bottom shell layers to be zero; you can adjust the sparse infill pattern and density to give your desired result (honeycomb @ 25% for this build)