AN Fitting Caps and Plugs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caps and plugs to keep dust out of expensive components during storage
- Ocena
- 5 / 5
- Polubienia
- 84
- Pobrania
- 770
- Wydruki
- 1
- Wyświetlenia
- 1948
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are some caps and plugs for AN lines I made to protect open lines from contamination. NOT FOR PRESSURE USE, probably not even liquid-tight. The wrench flats are not for wrenches.
The threads have been modified to print nicer, and tolerances opened up so you don't have to really worry about printer settings. Just watch out for heat creep with PLA and set a minimum layer time for adequate cooling or some of the overhangs in the threads might start to de-laminate.
Additional sizes may be made available if I feel like it.
***-10 cap thread pitch has been corrected.
****messed around and added the entire MS33656 list of caps and plugs. If you have a need for a -48 AN cap, here you go!