Katsuki Bakugo Gauntlet (My Hero Academia)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Be warned, current version is large and heavy. It's still WIP while I'm trying to lighten it up and save printing…
- Ocena
- 0 / 5
- Polubienia
- 116
- Pobrania
- 491
- Wydruki
- 1
- Wyświetlenia
- 3046
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Be warned, current version is large and heavy. It's still WIP while I'm trying to lighten it up and save printing time.
The gauntlet has a 5" small opening and a 8.5" large opening and is about 10" at its widest width. The eight sections are themselves large with the largest section being ~225mm. You may need to divide further for smaller printers.
UPDATE 12/11: Thin-shell versions uploaded as well. I have not test printed these however I'm quite sure they'll need some additional internal structure - EVA foam or the like. They should cut material usage by about 40% and print time significantly.
Print Settings
Printer:
FolgerTech FT-5
Supports:
Yes
Notes:
Since it's so large and heavy you may need more perimeters or infill than you would normally suspect. Hopefully future versions can shed some of the weight.
Category: Costume