Adjustable Battery Tray for Axial SCX10 III Coyote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This battery tray is a drop-in alternative to the original Axial AXI-2999 battery tray for Axial SCX10 III Coyote.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 114
- Wydruki
- 2
- Wyświetlenia
- 630
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Looking for a clean, adjustable, and fully compatible battery tray solution for your
Axial SCX10 III Coyote?
This tray is a drop-in alternative to the original Axial AXI-2999 battery tray, offering flexibility without compromises.
Key features
✅ Available in 88 mm, 100 mm, 112 mm, 120mm and 140mm variants
✅ Supports LiPo batteries up to 140mm length
✅ Fully compatible with the original Axial end stop
✅ No extra hardware needed – reuse stock screws
✅ Clean integrated cable routing for electronics
✅ Designed to be printed and installed easily
Battery Compatibility
Standard LiPo batteries up to 140mm length (see final notes please)
Traxxas 2S 2200 mAh LiPo (2820X)
Traxxas 2S 3500 mAh LiPo (2825X)
Traxxas 3S 1400 mAh LiPo (2823X)
Traxxas 3S 2300 mAh LiPo (2824X)
A custom end stop is included
Compatible with both the original Axial end stop and the included custom end stop for battery width adjustment
Battery Mounting
Battery is secured using reusable nylon battery straps
Maximum strap width: 20 mm
A custom end stop is included
Cable Management
Integrated cable routing channel for servo, winch, and lighting wires
Battery position and width can be adjusted using either the original Axial end stop or the included custom end stop
Cables on the custom end stop can be secured using 3 mm zip ties
Installation
Uses original screws from the stock Axial battery tray
Requires battery strap and optionally 3 mm zip ties for cable management
Fully reversible installation with no permanent modifications
Print settings
Models are pre-oriented for 3D printing
Supports needed
Works great with PLA, PETG, ASA or ABS
Final Notes
120mm and 140mm variant is yet to be tested if it does not interfere with front tire at max turn and angle
A simple, reliable upgrade that keeps your SCX10 III Coyote clean, functional, and trail-ready.