Magnetic Tile Toy Electronics: Lightbulb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An incandescent bulb which fits into a magnetic tile ball-run tile.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bulb holder is one of a number of models which turn a magnetic tile ball run tiles into a first batteries-bulbs-buzzers-and-buttons electronics kit connected up with banana plugs.
In addition to the printed parts, you will need:
1x magnetic tile ball run tile (the kind with a hole in the middle)
4x counter-sunk M3 bolts
1x E10 bulb
2x short pieces of wire
Solder wires between the battery holder terminals and banana socket tabs and assemble.
Tip: Attach the base of the screw fitting to tab to prevent it spinning freely making it easier to insert/remove bulbs.
Tip: The banana plugs can be inserted from either side.
The banana plug washer should be installed inside the case and should enable the tabs to be bolted down securely.