Magnetic Tile Toy Electronics: Buzzer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This buzzer is one of a number of models which turn a magnetic tile ball run tiles into a first batteries-bulbs-buzzers-and-buttons electronics kit connected up with banana plugs.
In addition to the printed parts, you will need:
1x magnetic tile ball run tile (the kind with a hole in the middle)
4x counter-sunk M3 bolts
2x M2 bolts
1x buzzer
1x diode (optional, but recommended)
2x short pieces of wire
Solder the buzzer, diode and banana socket tabs in series (taking care to get the diode polarity right) and assemble. The buzzer must be screwed in place with the two M2 bolts.
Tip: The banana plugs can be inserted from either side.
Tip: Colour around the banana socket opening without coloured plastic collars to make it easier to connect correctly.
The banana plug washer should be installed inside the case and should enable the tabs to be bolted down securely.