Moken (Kayak) Transducer Scupper Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 792
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
These prints can be used with a galvanized 5/16 bolt, nut, and washer to mount a Lowrance transducer in the scupper holes of a Moken 12.5 Kayak. I imagine it could also be easily customized to other kayak makes and models if not used as is.
Check out the mounting here: http://lilmikey.com/2016/05/06/fishfinder-mount-in-moken-12-5/
Print Settings
Printer Brand:
RepRap
Printer:
i3
Rafts:
No
Supports:
Yes
Notes:
You should definitely print them in the orientation in the STL file. I've tried alternatives and it gets sloppy. I used PETG and some decent infill to sturdy them up.
Category: Sport & Outdoors