Replacement for Honda Hood Rod Grommet (Flexible Filaments only!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cheaper and faster than Amazon :D
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 198
- Wydruki
- 1
- Wyświetlenia
- 930
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Update: Added a split version, to aid in making it easier to install. (This version may even work with hard plastics such as PETG and ASA. I can not confirm this myself) Once the rod is inserted, it should stay in place just fine. TPU is still very much recommended though, to make it as easy as possible.
I've also added loose versions, in case anyone is having trouble. These versions have slightly changed dimensions to give an easier install, but may have a loose fit. Lastly I struck-through the Honda Fit comment, as a user reported that it didn't fit their Fit.
Original description:
Make sure to print in a flexible filament!
The part number for the actual replacement is 90601-S84-A01
Hello!
This is a grommet that holds the rod, that holds up your hood, on many (if not all) Hondas.
(Confirmed for 1998 Accord, and 2008 Honda Fit )
When I bought my first car used, the plastic grommet that came with it from the factory was already broken. I finally got tired of having to mess with the rod to make sure it wouldn't slip out of the hole, that I decided to just make a new grommet out of flexible filament.
A replacement grommet would've been about 8 bucks, and a few days Amazon shipping.. Or a 10-minute design, then 20 minute print.
Bring a flat-head screw driver to help push the grommet into the hole on the car's frame. Depending on the hardness of the filament you use, you might be able to push it in with just your palm.